Atlantic Society of Radio Controlled Modellers


		Welcome to ASRCM's Forum! Welcome, Guest. Please Login or Register

Home

Help

Windy Weather

Milford 102 Cam

Atlantic Society of Radio Controlled Modellers › Atlantic Society of Radio Control Modellers › General Discussions › Failure of Servo on the 600

(Moderator: Forum Admin)

‹ Previous Topic | Next Topic ›

Pages: 1

Failure of Servo on the 600 (Read 1563 times)

Raptor

Private

Offline

Posts: 1553
Halifax

Failure of Servo on the 600
Jun 3^rd, 2013 at 8:39am

puzzled I have checked the voltage coming out the battery several times , and i have check the voltage on the receiver as well, I do not see any cause as to the failure of two servers on he throttle of my 600 . I checked to make sure the carb is binding up ect... , I have plugged other servo's into the channel last night to make sure it was working , seems to work fine , plug the new servo in that i purchased on Saturday , it not working , worked for what 6 min's on Sunday .

Paul Marsh

IP Logged

Newfie Bullet Private Offline ASRCM Forum User Posts: 313	Re: Failure of Servo on the 600 Reply #1 - Jun 3^rd, 2013 at 12:17pm Hey Paul are you running that servo through a gov. If you are check that that is not the issue
Back to top	IP Logged

Raptor Private Offline Posts: 1553 Halifax	Re: Failure of Servo on the 600 Reply #2 - Jun 3^rd, 2013 at 12:35pm Nope no gov. and no other leads in between servo is direct connected to futaba receiver 617
Back to top	Paul Marsh IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page