Atlantic Society of Radio Controlled Modellers | |
https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl
Atlantic Society of Radio Control Modellers >> General Discussions >> Transport Canada Aeronautical Information Manual https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl?num=1712361971 Message started by small_rc on Apr 5th, 2024 at 9:06pm |
Title: Transport Canada Aeronautical Information Manual Post by small_rc on Apr 5th, 2024 at 9:06pm
Today I received a notice of the availability of the 2024 Aeronautical Information Manual.
It is a large document. Fortunately it is also available in smaller sections that may be downloaded individually. There are some changes made for clarity. Of particular interest should be the changes to the RPA section. Notably, Control Line aircraft are particularly mentioned as NOT being classified as an RPA. This means that TC has no interest in them from a regulatory standpoint except to say they are not regulated. This clarification may have an impact on some clubs/associations/fields that have asserted a need to impose restrictions or limits on their use. There is not such a requirement from a TC perspective The link to the page containing the full new free edition and the indiviually downloadable sections is https://tc.canada.ca/en/aviation/publications/transport-canada-aeronautical-information-manual-tc-aim-tp-14371 You might consider keeping this electronically or partly in printed form with your other materials on RPA rules and training materials. Th website keeps wrapping the link. Maybe cut and paste the whole link into your browser. |
Title: Re: Transport Canada Aeronautical Information Manual Post by Kevin M on Apr 6th, 2024 at 10:42pm
Jim,
Link is dead "Error 404" |
Title: Re: Transport Canada Aeronautical Information Manual Post by CQ on Apr 7th, 2024 at 10:59am |
Title: Re: Transport Canada Aeronautical Information Manual Post by small_rc on Apr 9th, 2024 at 9:06pm
Thanks Chris.
|
Atlantic Society of Radio Controlled Modellers » Powered by YaBB 2.5.2! YaBB Forum Software © 2000-2024. All Rights Reserved. |