Atlantic Society of Radio Controlled Modellers
https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl
Atlantic Society of Radio Control Modellers >> General Discussions >> Joe's first time out with his FPV rig. Awesome!
https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl?num=1344127563

Message started by astroflyer on Aug 4th, 2012 at 9:46pm

Title: Joe's first time out with his FPV rig. Awesome!
Post by astroflyer on Aug 4th, 2012 at 9:46pm
Jo brought his new FPV setup to the field for the first time this morning.  he made one test flight with the gear aboard to check out the plane, a second flight with me standing by to help fly while he got the goggles off for a standard landing.

Then on the third flight, his SECOND on FPV goggles, joe made his first FPV landing.

A bit later. his THIRD time on FPV goggles, he controlled the plane right through hand launch to landing, arriving right in front of himself on the runway.  awesome flying!

1. Paul launching.

2-4 joe in the saddle
DSC_8264-a.jpg (99 KB | 233 )
DSC_8279-a.jpg (98 KB | 244 )
DSC_8280-a.jpg (99 KB | 236 )
DSC_8301-a_001.jpg (99 KB | 234 )

Title: Re: Joe's first time out with his FPV rig. Awesome!
Post by astroflyer on Aug 4th, 2012 at 9:47pm
Paul launching at ten frames per second
DSC_8283-a.jpg (98 KB | 233 )
DSC_8284_a.jpg (97 KB | 225 )
DSC_8285-a.jpg (98 KB | 229 )
DSC_8286-a.jpg (98 KB | 244 )

Title: Re: Joe's first time out with his FPV rig. Awesome!
Post by astroflyer on Aug 4th, 2012 at 9:48pm
Landings by FPV!!!!

way to go joe!
DSC_8273-a.jpg (83 KB | 244 )
DSC_8274-a.jpg (94 KB | 245 )
DSC_8314-a.jpg (98 KB | 234 )

Title: Re: Joe's first time out with his FPV rig. Awesome!
Post by astroflyer on Aug 4th, 2012 at 9:54pm
video just uploaded:

http://www.youtube.com/watch?v=koYnC6L124M&feature=g-upl

Title: Re: Joe's first time out with his FPV rig. Awesome!
Post by Newfie Bullet on Aug 4th, 2012 at 10:16pm
Right on Joe.....
will that fit on my chopper??????

Atlantic Society of Radio Controlled Modellers » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2024. All Rights Reserved.